Home  |  About HEXIS  |  Paginas en español  |   Application Tips  |  Printing Tips  |  Vinyl  |  Inkjet  |  Color Profiles  |  Downloads  |  Distributors  |  Message  |  Show Dates  |  Will it stick?  |  What's new?  |  Directions  |  Order
HEXIS USA Sign Vinyl and Inkjet Media - (951) 739 5999


MATERIAL SAFETY DATA SHEET

Products:

HEXIS branded self-adhesive laminates and coated media for inkjet printers

Manufacturer:

HEXIS S.A.
Z.I.
Horizons Sud
34110 Frontignan
France

Composition:

Face material: Colour-pigmented PVC, polyester or paper; top-coated or not coated
Adhesive: Solvent-based acrylic pressure sensitive
Release liner: hygroscopically stabilized HEXIS printed Kraft  paper, silicone coated on one side

General information:

There are no known health hazards under normal conditions of storage, handling and application. The risk of overexposure is unlikely.

Fire hazard:

Synthetic laminates are combustible. PVC film is self-extinguishing. Care should be taken to avoid sources of fire, extreme heat and ignition during transport, storage and handling. In case of emergency normal means of fire extinguishing equipment such as water, CO2, foam or dry chemical media can be used. Self-contained positive pressure breathing apparatus must be worn when fire fighting in confined spaces. PVC develops hydrogen chloride gas at combustion; explosive mixtures can arise due to decomposition.

Information on toxicity:

The finished branded self-adhesive laminate is not hazardous provided it is handled correctly. The PVC laminate is free of cadmium (Cd <75ppm) and free of residual vinyl chloride monomer (VCM <1ppm).

Transport and storage:

Traffic regulations and rules for moving heavy loads must be complied with. Storage should be in suitable packing at 50% humidity and between +60...+75°F. Food, beverages or tobacco products should not be handled or stored in the same areas. The applicable health and safety legislation should be strictly adhered to.

Handling and application:

Application should take place within a range of +50°...+104°F. The usual precautions appropriate for handling industrial materials should be taken. During application direct skin contact or contact with food should be avoided. The odors associated with the products are not recognized as a health hazard and can be minimized if application takes place in a well-ventilated room. Hygienic practices demand that after handling adhesives and before eating, drinking or smoking hands should be washed with soap and water. In all cases obtain medical advice.

Waste disposal:

The materials can be disposed of as ordinary waste for incineration through the appropriate and recognized facilities in compliance with the environmental legislation applicable.

The above statement does not constitute an expressed or implied warranty, including warranties for fitness for a particular purpose or merchantability. If in doubt about the compatibility of the film with any particular application method or about any possible or likely health hazards we recommend that the user seek advice from the manufacturer before handling the product. HEXIS S.A. assume no liability for claims beyond the replacement value of any product proven to be defective in material or workmanship and is in no way liable for injury, incidental damages or consequential loss.


 

Google

Didn't find what you were looking for? Try a search:

Search hexisusa.com Search hexis.net Search hexis.co.uk Search Internet 

Home  |  About HEXIS  |  Paginas en español  |   Application Tips  |  Printing Tips  |  Vinyl  |  Inkjet  |  Color Profiles  |  Downloads  |  Links  |  Directions  |  Message  |  Show Dates  |  Will it stick?  |  What's new?  |  Order

This web site is © 1999-2005 by HEXIS USA LLC. All rights reserved. Privacy Policy